Saturday, March 21, 2015

We're On Our Way

ebay
Well, the tub surround has been ordered and will arrive within the next seven days. When it does, I'm off to local hardware stores and lumber yards for furring strips (we may not need more than three), backer board (four pieces), adhesives and fasteners. Also, framing and casing for the window. We've almost decided to use vinyl lumber and molding for the window. It costs a little more, but it's invulnerable to water damage. It comes in stark white, and the baseboards and door facings in the bathroom are cream colored, but the vinyl can be painted.

The way I'm planning to do the bathroom doesn't look very MCM.

This is what a bathroom in a small, suburban ranch house in the early 60s looked like: Lots of ceramic tile, colors we now call "retro" (pink, turquoise, sea-green, along with neutrals like gray and black); sometimes with Formica countertops. 

The Real Awakening Blog
It's probably been a long time since our little bathrooms looked like they did when the house was built in 1957. The only thing "retro" is the Pepto-Bismol pink walls in the  hall bath, revealed when the 1990s floral-striped wallpaper started peeling off....

Lowe's

In any case, my plans for the space include a the new tub surround discussed in the previous blog entry, and vintage-style sliding glass shower doors.  Walls will be painted light brown -- a somewhat desaturated cafe au lait... Vinyl floor tiles with a faux stone look in browns with touches of green...

Here are a couple of before and projected-after images.



You can't tell in these images, but the faux marble vanity is a cream color with (thankfully) not much marbeling. When the tub is refinished, the vanity will be refinished as well -- both in glossy white. The vanity cabinet will be painted a semi-gloss dark brown, and get new hardware.


ebay
The wire shelves above the toilet that my husband took upon himself to install (for towels and other storage) will disappear. Since there's so little MCM in the room, I'll be looking to accessorize with vintage items, and one will be a shelf above the toilet like this (though I would prefer atomic starbursts instead of the scrolls....)

And I still love the idea of using a vintage telephone stand, like the one pictured at the beginning of this entry, to hold a plant on the top and for storing rolls of tissue below.

Ace Hdwe
I love the look of the "Futura" bath hardware set by Franklin Brass. It is aptly named  We would need a towel bar, towel ring, recessed tissue holder. We also plan install a grab rail on the end wall of the tub enclosure (opposite the faucet).

ebaty
I'll be on the lookout locally for a vintage metal mesh trash can -- these are sometimes way overpriced on e-bay and they can arrive damaged. E-bay has a refund policy for damaged merchandise, but its best to avoid that, if possible. And if the items purchased locally are a bit worn or rusty, no matter. A little sanding and some spray paint will do the trick. Metallic spray paints look so much better than they did just a few years ago.

Lastly, I'll be looking to gradually supplement our white bath linens with beige, sage and olive...  It may not be fanciest decorating job, but it will certainly be an improvement over the worn, damaged bathroom we have now.

Saturday, March 7, 2015

Here's Hoping...

...that in the next few weeks, we'll get started on one of the two of the major projects facing us with our house -- replacing the tub surround in the hallway bathroom. Like many houses from the mid-20th century, this one has a window above the bathtub, and in the almost 60 years since the house was built, the wood frame and sill have sustained extensive water damage. Even worse, the is water damage behind the tub wall.

Best we can tell, ceramic tile was applied directly to the plaster walls in the tub area, and leaks behind the wall have led to some rotted furring strips on the outside wall. Fortunately, the studs on the inner walls don't seem to be damaged, but we won't know for sure until we remove the tile.

It seems unlikely that we can find the milled woodwork in the same pattern to replace the window facing, but very similar patterns are available at surprisingly reasonable cost at the big box home improvement stores. (I always thought millwork was very expensive; glad I did some price shopping!) Furring strips are quite cheap, and we won't need many. We will tear out the ceramic tile and the walls behind it, and replace them with backer board and a five-piece tub surround (three major pieces plus corners). These are available in various plastics for various prices (from fifty bucks to over a thousand). And apparently, a cut-out for the window is easy to do. (Just measure twice before cutting!)

The finish is gone on the tub, and we'll do a DIY refinish job with a Rustoleum or similar kit. Apparently, these DIY kits available today are a vast improvement over those from just a few years ago. Success depends greatly on how well the surface is prepared -- i.e., cleaned and sanded. Really, really sanded. We will see how will my little palm sander works for this job.

Once the tub wall and surround, window facings and tub surface are complete, we will install a sliding glass shower door salvaged from my late parents' retirement cottage. Aluminum framed with frosted glass, it is very much in keeping with the age and style of our house.

The last major bathroom change will be the vanity. The faux marble sink and homebuilt cabinet supporting it will be replaced. With what is uncertain right now. We didn't use the cabinet, so I'm considering an ordinary wall-hung white lavatory of vitreous china, possibly a pedestal model, if one can be found compatible with the style of the house, and for a reasonable cost. That should give the bathroom a larger and more open feel. The three-door medicine chest (husband's purchase; I hate it) will be replaced with one that mimics a mid-century model. (1950s "Satin Glide" model on the left, current model on the right; several manufacturers make similar items.)


Replacing the sheet vinyl floor with vinyl tiles will be a relatively easy job. I want a beige-green marble look. It will have to be carefully sealed to prevent water seeping into the seams.

The tacky floral striped wallpaper will come down off the walls, any holes or cracks will be spackled, and the walls painted cafe au lait.

Futura-syle linen hardware (two towel bars and a towel ring along with a toilet paper holder) will fit right in with the simplicity of the decor. And the piece de resistance, if I can find it, will be two original 1960s paint by numbers paintings (or prints made from them): the flamingos and snowy egrets set. Talk about Old Florida meets Mid-Century modern!


Love how this lady used a repurposed metal mesh telephone table for towel storage, though I think rolls of tissue might fit better.  Pink bathroom at Retro Renovation  Also like the little tray on the toilet lid holding soaps. So naturally I'm on the lookout for some vintage metal mesh accessories for the bath. Like so many other things from back then, they are small -- perfect for small rooms. (I also love the gold atomic stars she stenciled on the wall, and I'm keeping that idea in the back of my mind...for something. Who knows what!)

There's a lot of work to be done, but nothing particularly difficult, even for an ol' broad with bad knees...

And after that! On to the kitchen! I have finally come up with a color plan for the kitchen that is MCM out the ying-yang -- avocado and orange! It was inspired by photos posted on one of my MCM groups by members showcasing their authentic 1950s houses (one designed by a student of FLW). But I remember visiting in homes back in the 50s and 60s with orange Formica countertops and walls of olive or avocado...

Can't wait!


That's it for now. Will post occasional reports as the work progresses.


Saturday, February 28, 2015

In Search Of...

Check the right sidebar ------------>> and you'll see a list of pages -- "Home" and "In Search Of..."

"In Search Of..." is new and comprises a list of MCM items I'm looking for, to buy or possibly to trade for. I have some MCM items I don't need and will be looking to sell or trade them. I'll soon have another page showing these items, with information about how to purchase or trade for them. I likely won't have enough time or merchandise to start an etsy store, so I will probably list the items on MCM buy/sell/trade groups on Facebook, or the old standby, ebay.

It will be a little while before I need these items, though if there are some real bargains, I can go ahead and get them. But for the short-term future, we will be doing some structural repairs and renovations, and cosmetic changes, in the kitchen and baths. Once that's out of the way.... Woohoo!

Saturday, November 1, 2014

A Temporary Console

In this computer mockup of my little dining area, in front of the window, there's a small console, sized for the room, to serve as a sideboard. My mama's corner cabinet, which I considered stripping and refinishing in a Danish Modern ... ish mode, doesn't have an area big enough to serve as a sideboard. Hence, the console.

But, with the discovery and purchase of a genuine MCM Stanley china hutch, the corner cabinet will become a candidate for Craigslist. Unfortunately, there's even less space to serve as a sideboard on the hutch.

Finding a genuine MCM console small enough for my dining area is possible -- they come in all sizes, and I see small ones online frequently, though not always on sales sites. So, possible, but not easy. It's a matter of continuing to look, checking Craigslist, garage sales, estate sales and thrift shop...

Meanwhile, this little puppy will have to do. This is not fine furniture by any means. It's cheapo  import stuff, probably from the 90s.


But it's small enough to fit the space, and large enough to serve the purpose. Plus, it has drawers where I can put stuff!  Plus, it was really cheap.

So it will do. 

For now, it will do

Wednesday, October 15, 2014

Finally! I Found a China Hutch!

A beautiful little MCM china cabinet with sliding glass doors.



One of the first things I did was post about it on one of the MCM groups I'm a member of. This particular group was originally started for education about mid century modern design in architecture, furniture, pottery textiles, etc. No kitsch... no clown paintings or chalkware fish and bubbles for the bathroom wall. There was a separate group for that, but I got kicked off of it for, apparently, offending the moderators. I know I didn't break any rules.

Be that as it may, over the months, the MCM design group has seen more and more people join (it has over 20,000 members now) posting more often about their garage sale/curbside/dumpster finds (and some of those finds are quite spectacular ... it's amazing what some people think are junk and will throw away)...  Still, I didn't know if these folks were violating the group's guidelines, or whether the group's very magnanimous moderator was being accommodating. So I issued a disclaimer to the moderators and shared my find:
DC, I beg forgiveness in advance. I'm throwing myself on your mercy, 'cause I'm knowingly and on purpose gonna break the rules of this group. I promise I'll never do it again.

LOOK WHAT I BOUGHT YESTERDAY! An authentic, genuine VLADIMIR KAGAN 1950s china hutch! For FIFTY DOLLARS! Just look at those shapely Kagan legs! Have you ever seen any furniture legs so beautiful?

Okay, so I'm joking about Kagan. And it wasn't made in Denmark or anywhere else in Scandinavia. It's a Stanley, made by hicks and rednecks in North Carolina. I don't care. I myself am a hick-slash-redneck (and proud of it) from a long line of Blue Ridge hillbillies, and I love this little hutch! I've wanted one of these for soooo long; but the only ones I ever found were either (a) too expensive or (b) too big. This puppy is just right! I am soooo excited!
 
This bad boy really was only $50. It's just 3 feet wide and 5 feet tall and will fit nicely in my small dining room. Has some dings in the veneer, but otherwise the finish appears to be in remarkably good shape and will probably need only minimal restoring. The whole thing is very dusty -- I think it has been stored for a while.

A corner of one glass door is broken, meaning I'll probably have to replace both of them. Darn. The area in front of the shelves is too small to serve as a sideboard, so I'll have to get something smallish to use as a console/cedenza. Darn again. But that's just life in MCM obsession-ville.

And those may not be Kagan legs, but they're still awful cute. I can't wait to get it all cleaned and fixed up so I can put my Confederate flag plates and tumblers and my collection of rebel soldier figurines on display ....

JUST JOKIN'!

I don't have any Confederate flag plates and tumblers or a collection of rebel soldier figurines. I'm gonna put my mama's china in it -- not Franciscan Starburst, alas, Syracuse china Old Ivory Nimbus Platinum which is very beautiful and ought to look like dynamite behind those glass doors...

Did I mention that I'm SOOOO excited?!!?
Got some great responses from other group members. I guess I'm a better comedienne than I thought!

This is an Old Ivory Nimbus Platinum dinner plate.You really can't tell how beautiful it is from this picture.

Here are some more pieces of this beautiful pattern at Replacements:  Old Ivory Nimbus Platinum

I have eight place settings of this stuff, and several serving pieces. My mama bought it with S&H Green Stamps in the 50s and 60s. It's mid-century, but not modern. Not like Franciscan Starburst.  But it is beautiful and it was my mama's....

I'll be putting Mama's crystal on display in the hutch, too. Fostoria American.  I have quite a collection of this -- which she also purchased with Green Stamps. I'm not sure why she chose such a heavy, antique crystal to go with her delicate china... but somehow, on her table, it worked!

As for the Confederate figurines, plates, and such, I'm thinking I need to buy some and put them, along with books and plants, in shadow boxes in my writing room... like this, but smaller...

Houses, furniture, textiles, even cars, were so much cooler and more fun back in the day. The two decades or so following WWII were times of optimism. People had something positive to look forward to in the future, unlike today, where the future looks bleak and in decline, for as far as the eye can see...


Sunday, September 7, 2014

Found On Craigslist

Several weeks ago, I came across something I almost never find on our local Craigslist, even though I check it often. Danish modern dining room furniture that I immediately recognized as made by Stanley (in North Carolina).  Dining table, four chairs, and a hutch. They had been for sale for an astounding $140 ($70 for table and chairs, $70 for hutch) and had not sold, so the price was reduced to $70 for all.

I called as soon as I saw them and asked if I could visit to measure the hutch. It looked like it would be too big for my small dining area, but you can't really tell looking at an image online. I also messaged with another MCM fan in town who's on the same Facebook groups. She really wanted the hutch, but didn't need the table and chairs, so we agreed to a joint purchase. She had to work that day, and I'm a retired ol' broad, plus I have a pickup truck... So I arranged to go get the booty...

Unfortunately, circumstances kept me busy and I didn't get to the seller's house  until about 2 p.m., and she had sold the hutch. She was anxious to get rid of the table and chairs, though, and she took me up on my offer to buy them for $30.
Stanley dining table and chairs -- and the hutch that got away.

So now I'm the proud owner of TWO sets of Stanley Danish modern chairs. I really like best the ones I already had, so I will keep them.  I will sell the new ones, and since the table is too big for my space, I will sell it, too.

But first, I'll do some improvement.  The tabletop is laminate, and in great shape, but the legs and apron could use some Finish Renew. The chairs are wobbly and need to be reglued. The chair seats have been (poorly) covered with black vinyl. That needs to come off. If the original upholstery fabric isn't salvageable, I will recover the seats in an MCM bloucle, if I can find some that won't break the bank. Color? As close as possible to whatever is under the black vinyl.

My other chairs also need to be re-glued, and completely refinished. I bought them for next to nothing at a junk shop on T Street several years ago, and they are truly lovely.

Beneath the blue linen-like fabric, the original seat fabric is a heavy-weave yellow. I'm not sure I want to replicate that closely, however.  Not sure what color I'll use.

The table I bought to go with them, however, is not MCM or DM, though it's a beautiful wood thing. It needs refinishing -- and then replacing, if I go with these chairs. 

And once the newcomer set is finished and sold, if I can't find a Danish modern dining table small enough for my space, I want to see about building one.

One like this.

A Ventura table.

You might not be able to tell from the picture, but the legs of the blue-seat chairs are rectangular, not round like the new ones. And a Ventura table would look perfect with them.  What's a Ventura table? Here's a pic:

Here's a picture of one in use at Houzz:  Ventura table

Those rectangular legs would look great with my blue-seat chairs, wouldn't they?

Since all the Ventura dining tables I've found online are like $1,200, I will try to persuade my husband to help me build one.  I've been checking online for woodworking plans for a Ventura table, but if I can't find any, it shouldn't be too hard to figure out ourselves. Standard table heights, leg fasteners, info on all this is available online.

Any table we built would not have the surf-board top like the one illustrated above... but many I've found online have flat, rectangular tops, and some of them are a bit clunkier that this beauty. The advantage to building one, aside from the satisfaction of it, and the money saved, is that it can be built to measurements that fit comfortably in my dining space.

In addition to the two sets of walnut Stanley Danish modern chairs, I also have this really groovy set of MCM chairs made by Chromcraft (in Mississippi -- I do love Suth'n modern furniture!). If memory serves, I paid $36 for this dinette set at a junk shop in Warrington around 2006 or so. The table doesn't match the chairs (you can't see them in this pic, but the legs have Spanish "wrought iron" curlicue braces). On one of the chairs, the small decorative screws that fasten the back to the metal frame are missing, and on another the laminate on the back has chipped off in one corner.  These should be easily remedied/repaired -- and I have a set of tapered metal legs that are just waiting for some metallic brown paint and a new tabletop -- I'm thinking beigy Formica the same color as the chair seats...
What am I gonna do with three dinette sets when I barely have room for one? Well, like I said, the newbie will be fixed up and sold. Then I'll have to decide between lovely walnut DM chairs, or groovy laminate chairs ... and tables to match.

Sunday, August 10, 2014

Cool, Hep Fifties Flooring...

If you're into Mid Century Modernism, chances are you love the cool designs of the vinyl asbestos flooring from the era, like these:
But people go ape these days when they hear the "a" word. Besides, it's not available anymore.

You can get some sort-of vintage-look flooring these days -- there's been a revival of linoleum, which has a look I love, but few vintage patterns are available. Linoleum has gone "uptown," I'm afraid. In any case, I'm also looking for projects, so making a vintage-look floor myself fills the bill.

Right now, I'm collecting vintage 'fifties design ideas off the internet...like these (which were no doubt unearthed after being covered with other flooring, carpet, etc., and show damage that's only to be expected after 60+ years of wear and tear):

My plan is to stencil the design on economical vinyl flooring, either sheet or tiles. Since the flooring will be the background for whatever design will go on it, it needs to be somewhat subdued. Here are a couple of designs I like from a big box store.

Whatever retro design I choose, it will be stenciled onto the flooring. I'll need to lightly sand the area where the painted design will go ... and hope that the finish polyurethane will bring the shine back. This will be something to research and test before actually doing it. However, it shouldn't be an insurmountable problem, as floor stenciling has been a craft project for DIYers for years.

My first step, after preparing the floor, will be to cover adjacent walls, cabinets., etc., with a drop cloth because layer one of the design will be gold spatters, and spattering goes everywhere. This will take some advance practice to get right. Here's a tutorial on spatter painting.
http://www.howdididoit.com/home-garden/spatter-paint-a-floor/

I might consider a darker spatter pattern first, then the gold. That might be more in keeping with vintage designs. In any case, once the gold flecks are thoroughly dried and cured, it will be time to paint the pattern.

There were some quite intricate "atomic" designs in those days, though most were found in textiles. My idea is to keep the floor designs as simple as possible.

Once the design is decided upon, it will be stencil-making time. There are numerous tutorials online about making stencils.  Here's one: http://www.sawdustandembryos.com/2012/04/tutorial-how-to-make-your-own-stencil.html  After stenciling the floor, it's sealed with either a sealer made for vinyl floors, or good ol' polyurethane.

Here's how an MCM pattern in my colors (at least, for now) might look on a contemporary floor. The  problem with doing these designs in a computer graphics editor is that they are so precise. No subtle variation in color, no slightly wavy edges. But at least it gets the idea across.

Since floors are the last thing to do in room fix up (and only the baths and kitchen will have vintage look flooring) there is plenty of time to research more designs and create the final version.

In the bathroom, a new tub enclosure is on the agenda, which will involve tearing out the current ceramic tile, installing new furring strips on the outside wall, adding backerboard, etc. After which comes reglazing the tub itself. We will DIY that using ultra thinned oilbased enamel applied with an  ultra-fine foam roller, in many coats with sanding between. (More on that technique in a later post.)

In the kitchen, as already discussed, we're looking at cabinet and countertop refurbishing, plus general fix up (wall paint, new range hood, stuff like that).

So while necessary but more mundane projects are underway, it'll be nice to have this fun project to look forward to.